Donut Production

• frying Area 18 inches side-to-side, 26 inches front-to-back (46 x 66 cm)
• Gas heated at 44,000 BTU/hr
• Shortening capacity 96 lbs by weight, 13 gallons by volume (44 kg/49 liters)
• Capacity 24 standard donuts, approximately 65-80 dozen donuts per hour
• Natural Gas or Liquid Propane (specify when ordering). A conversion kit is available if changeover is needed
• 120 Volts or 240 Volts, 50/60Hz, 1-phase. (specify when ordering)
• Digital electronic thermostat control
• Drain tray on right side of fryer. Can be moved to left side
• Drain and valve with exterior handle to empty shortening
• 2 cake donut frying screens with handles
• Generally suitable for Hushpuppies, Loukoumades, Funnel cakes, Elephant ears, Paczkis, Porogis, Fritters, and fried goods of all kinds
• ETL certified to NSF-4, ANSI Z83.11a and CSA1.8a.2004
• CE models available for European Union and other countries
• (Optional) Standing pilot ignition and thermocouple temperature control – no electricity required. These models are designated: 718LFG, 724FG, 734FG
• See PDF tab for more specifications
• See below for available accessories for your donut fryer

A ventilation and fire suppression hood is usually required for indoor locations.

• Frying Area 24 x 24 inches (61 x 61 cm)
• Gas heated at 60,000 BTU/hr
• Shortening capacity 119 lbs by weight, 16 gallons by volume (54 kg/61 liters)
• Capacity 36 standard donuts, approximately 80-100 dozen donuts per hour
• Natural Gas or Liquid Propane (specify when ordering). A conversion kit is available if changeover is needed
• 120 Volts or 240 Volts, 50/60Hz, 1-phase. (specify when ordering)
• Digital electronic thermostat control
• Drain tray on right side of fryer. Can be moved to left side
• Drain and valve with exterior handle to empty shortening
• 2 cake donut frying screens with handles
• ETL certified to NSF-4, ANSI Z83.11a and CSA1.8a.2004
• CE models available for European Union and other countries
• (Optional) Standing pilot ignition and thermocouple temperature control with no electricity required. This models is designated: 724FG
• See PDF tab for more specifications
• See below for available accessories for your donut fryer
• A ventilation and fire suppression hood is usually required for indoor locations.

• Frying Area 18 inches side-to-side x 26 inches front-to-back (46 x 66 cm)
• Shortening capacity 82 lbs by weight, 11 gallons by volume (42 kg/61 liters)
• Capacity 24 standard donuts, approximately 65-80 dozen donuts per hour
• 208-240 Volts, 50/60Hz, 1-phase or 3-phase (specify when ordering)
• Drain tray on right side of fryer (can be moved to left)
• Heavy duty elements, tiltable upwards for easy kettle cleanup
• Electronic temperature controller
• 2 cake donut frying screens
• Heavy duty drain and valve with exterior handle to empty shortening
• 208-240 Volts, 50/60 Hz, 1-phase or 3-phase (specify when ordering)
• ETL certified to UL-197, CSA C22.2 and NSF-4
• CE models available for European Union and other countries
• See PDF tab for more specifications
• See below for available accessories for your donut fryer
• A ventilation and fire suppression hood is usually required for indoor locations.

The EZMelt18 is a recycling filter that heats shortening in the tank, with these benefits:

• If Zero Trans Fat shortenings are used, they gradually become thicker at normal bakery temperatures. This can lead to pump blockages and failures with standard filters. Using the heated EZ Melt overcomes this problem.
• Pumping reheated shortening through a fixed connection to the fryer is faster and safer than any other method, such as dropping in shortening blocks. The EZMelt does this using a refill hose (optional) which attaches directly to a Belshaw fryer.

Standard features

• Compatible with 618L, 718LCG and 718LFG fryers, Donut Robot® Mark II, and Donut Robot® Mark V.
• Can be used with any standard donut shortening including Zero Trans Fat shortening
• Heating element with factory set thermostat to 225°F/107°C. Element tilts up for easy tank cleaning. Tank itself is readily removeable.
• Long-life synthetic filter screen that needs only annual replacement under normal operating conditions.
• Heavy duty pump & motor for pumping shortening to the fryer on demand
• Heavy duty, moisture repellent foot switch for activating pump
• Cube cutter for fast melting of solid shortening blocks up to 50lbs (22.7kg)
• Hand held rinse hose with heat resistant handle
• Optional Refill Hose – allows regular topping up of fryer through a fixed connection to the fryer. The refill hose can be left in place on a Belshaw fryer at all times allowing frequent topping up of shortening level (purchased separately, see accessories)
• High-temperature limit switch
• 120V or 240V, 50 or 60 Hz, 1-Phase
• Certified by ETL to NSF Std 4, CSA C22.2, and UL 1889

The EZMelt24 is a recycling filter that heats shortening in the tank, with the following benefits:

• If Zero Trans Fat shortenings are used, they gradually become thicker at normal bakery temperatures. This can lead to pump blockages and failures with standard filters. Using the heated EZ Melt overcomes this problem.
• Pumping reheated shortening through a fixed connection to the fryer is faster and safer than any other method, such as dropping in shortening blocks. The EZMelt does this using a refill hose (optional) which attaches directly to a Belshaw fryer.

Standard features

• Compatible with Belshaw’s open kettle 624, 724CG and 724FG fryers.
• Can be used with any standard donut shortening including Zero Trans Fat shortening
• Heating element with factory set thermostat to 225°F/107°C. Element tilts up for easy tank cleaning. Tank itself is readily removeable.
• Long-life synthetic filter screen that needs only annual replacement under normal operating conditions.
• Heavy duty pump & motor for pumping shortening to the fryer on demand
• Heavy duty, moisture repellent foot switch for activating pump
• Cube cutter for fast melting of solid shortening blocks up to 50lbs (22.7kg)
• Hand held rinse hose with heat resistant handle
• Optional Refill Hose – allows regular topping up of fryer through a fixed connection to the fryer. The refill hose can be left in place on a Belshaw fryer at all times allowing frequent topping up of shortening level
• High-temperature limit switch
• Stainless steel frame, tank and casters
• 120V or 240V, 50 or 60 Hz, 1-Phase
• Certified by ETL to NSF Std 4, CSA C22.2, and UL 1889

• Not recommended for trans fat free shortening!
• Uses a long-life synthetic filter screen that needs only annual replacement under normal operating conditions
• Heavy duty pump and motor for pumping back shortening to the fryer after filtering
• Foot pedal switch for activating pump
• Includes hand held rinse hose for rinsing debris from bottom of fryer and for refilling fryer
• Slides under compatible floor and tabletop fryers
• Heavy duty stainless steel frame, tank and casters
• Shortening reservoir is removeable for periodic cleaning
• SF Shortening Filters are not designed for Zero Trans Fat shortenings. These shortenings solidify as they cool down, sometimes causing blockages in the filter pump.
• Belshaw recommends the EZMelt18 Melter-Filter for Zero Trans Fat shortenings. The EZMelt contains a heating element to liquify any shortening.
• 120V or 240V, 50 or 60 Hz, 1-Phase
• Certified by ETL to NSF Std 4, CSA C22.2, and UL 1889

• Not recommended for trans fat free shortening
• Uses a long-life synthetic filter screen that needs only annual replacement under normal operating conditions
• Heavy duty pump and motor for pumping back shortening to the fryer after filtering
• Foot pedal switch for activating pump
• Includes hand held rinse hose for rinsing debris from bottom of fryer and for refilling fryer
• Slides under compatible floor and tabletop fryers
• Heavy duty stainless steel frame, tank and casters
• Shortening reservoir is removeable for periodic cleaning
• SF Shortening Filters are not designed for Zero Trans Fat shortenings. These shortenings solidify as they cool down, sometimes causing blockages in the filter pump.
• Belshaw recommends the EZMelt24 Melter-Filter for Zero Trans Fat shortenings. The EZMelt contains a heating element to liquify any shortening.
• 120V or 240V, 50 or 60 Hz, 1-Phase
• Certified by ETL to NSF Std 4, CSA C22.2, and UL 1889

Compatible with 616B, Cut-N-Fry, Donut Robot Mark II, Mark II GP, Mark II Gas, Mark II GP Gas, Mark V, Mark V GP Fryers.

The Filter-Flo is a dependable heavy duty siphon that extracts and filters shortening from fryers, in situations where there is no room for a built-in drain, or if your fryer has no built-in drain. A squeeze of the large bulb starts the flow which can empty a Mark II in a few minutes. A reusable cloth filter cleans as the liquid passes through. Note: the Filter-Flo requires a customer-supplied leakproof container for filtered shortening to pour into. Filter-Flo is not needed if you already have a shortening filter such as SF or EZMelt

• All electric donut machine, capacity approximately 37 dozen standard size donuts per hour
• Deposits 2 standard donuts per conveyor row. A half-speed switch cuts output to 1 per row
• Makes consistent, well rounded cake donuts with synchronized cake donut depositor
• Makes excellent yeast raised donuts with the addition of optional Feed Table, Trays, and Cloths (see accessories)
• Dial with generous range for adjusting size of cake donut
• Makes mini donuts with optional mini donut hopper and plunger, which will deposit 4 minis per row. (Part # MK-1502-1, see accessories). Mini donut capacity will be approximately 109 dozen/hour
• Electronic temperature controller – maintains temperature normally within ±1 degree
• Speed is adjustable by dial on control panel
• Outfeed belt dispenses donuts into collection device such as Roto-Cooler
• Heavy duty elements which tilt upward when cleaning
• High temperature shut-down switch
• Hopper, plunger, conveyor, and kettle are all removable for easy cleaning
• 1-9/16 inch Plain Plunger for Ring donuts
• Single and 3 phase voltages available for all countries
• North America models certified to UL, NSF and CSA
• Machines shipped to European Union conform to CE regulations
• Australia/NZ, Japan, and other worldwide models available
• See below for accessories and options such as Roto-Cooler and EZMelt Filtration System
• Compatible with Insider Ventless Cabinet

• Gas heated donut machine with electrically powered conveyor and depositor
• Capacity 350 donuts per hour (29 dozen) at fry time 120sec
• Requires only 360 Watts of power for conveyor and despositor
• Deposits 2 standard size donuts per conveyor row
• 40,000 BTU per hour
• Natural Gas and Liquid Propane models available (specify at purchase)
• Makes consistent, well rounded donuts with synchronized depositor
• Makes excellent yeast raised donuts with the addition of optional Feed Table, Trays, and Cloths
• Makes mini donuts with optional mini donut hopper and plunger, which will deposit 4 mini donuts per row. (Part # MK-1502-1, see accessories). Mini donut capacity will be approximately 700 minis/hour (59 dozen) at fry time 90sec
• For faster mini donut production, choose Mark II GP Gas
• Speed is adjustable by dial on control panel
• Size is adjustable by dial on depositor
• Automatic conveyor with automatic donut turner
• Outfeed belt dispenses donuts into collection device such as Roto-Cooler
• High temperature shut-down switch
• Hopper, plunger, and conveyor, and kettle are all removable for easy cleaning
• See below for accessories and options
• Not compatible with Insider Ventless Cabinet (only compatible with electric models)